Konica Minolta kn-304 用户手册

Chapter 4  Printing by lpd/lpr (Windows NT)

KN-304 Network Board  4-3

■

 lpd/lpr setup

●

 Installing Microsoft TCP/IP Print Service

Select [Network] from the [Control Panel] of a Windows NT computer, and the [Network] dialog box ap-

pears.  Click the [Services] tab and make sure that [Microsoft TCP/IP Printing] exists in the list of Network

Services.  If it is not found, add TCP/IP.  See Windows NT Help or something else for how to add TCP/IP

Printing service.

●

 Adding a printer port and installing the printer driver

On completion of installing Microsoft TCP/IP Print Service, you add a printer port and install the printer

driver [Konica IP-011 Nozomi] by using the [Add Printer] feature of Windows NT.  The CD-ROM containing

the printer driver must be prepared.

For more detail of the printer driver, refer to the instruction manual of the Konica IP-011 Printer Controller.

See the following section, Printer Driver Setup from Client, for setup to use as a client the KONICA 7020

series that is set up as a printer shared by Windows computers on the network.

The procedure of adding a printer port and installing the printer driver is as follows.

Click the [Start] button and select [Printers] from [Settings].

Double-click [Add Printer] to activate [Add Printer wizard].

Select [My Computer] and click [Next].

Click the [Add Port] button.

Select [LPR Port] from [Available Printer Ports] in the [Printer Ports] dialog box.  Click the [New

Port] button.

Type the IP address assigned to the KN-304 Network Board for [Name or Address of Server

providing lpd] in the [Add LPR-Compatible Printer] dialog box.

Type [PORT1] for [Server Printer Name or Printer Cue Name], and click the OK button.

Close the [Printer Ports] dialog box.

Click [Next] of the [Add Printer wizard], and you come to the step of installing the printer driver.

You select the printer manufacturer and model on the window displayed.

Set the CD-ROM containing the printer driver in the CD-ROM drive and click the [Have Disk...]

button.  The [Install from Disk] dialog box appears.