Hoyt 2002 compound bow 用户手册

18

cam bows both the module and the draw stop peg
must be adjusted.  When the module is rotated com-
pletely to the minus (-) sign, the cam will be in the
“A”draw stop peg setting, or the shortest draw
length.  By rotating the module in the direction of the
plus (+) sign, you will increase the draw length
approximately 1/2 inch per each hole, and each hole
represents the next higher letter.  For example, if the
module is rotated completely to the minus sign which
is module position “A”, and you then rotate it to the
plus (+) sign, the first hole available for the module
screw is module position “B” or an increase in draw
length of 1/2 inch.  (See figure 14 for diagram).  

fig 14
All inner-cam single cams are marked with a size 1 - 3.
The charts on the next two pages show peg position in
relation with module position depending on the size
of the cam.  Please follow charts closely to achieve the
greatest performance from your cam.  Each recom-