Jacuzzi J - LX 用户手册

37

Remove and clean the headrest pillows as  

needed with soapy water using a cloth or 

soft-bristle brush. Always remove the 

pillows when adding chemical shock treatment to the spa water. When 

the sanitizer reading is below 4.0 ppm, pillows can be reinstalled.

To preserve the sheen of your spa’s surface, it is crucial that you avoid 

using abrasive cleaners or cleaners which have adverse chemical effect 

on the surface. If you are not certain as to the suitability of a particular 

cleanser, consult your authorized Jacuzzi dealer. Regardless of the 

cleanser used, use extreme care to assure that no soap residue is left on 

the surface. This could cause severe sudsing when the spa is refilled.
12.5  maintaining the Cover

Using the Jacuzzi insulating spa cover anytime the spa is not in use will 

significantly reduce your operating costs, heat-up time and maintenance 

requirements. To prolong the life of the cover, handle it with care and 

clean it regularly. Below are the care instructions.

A. 

To Clean and Condition the Vinyl Cover:

1.  Use a garden hose to loosen debris and dirt.

2.  Using a large sponge or a soft bristle brush, use diluted or mild soap 

and scrub the vinyl top. Rinse clean and do not allow soap to dry on 

cover. Do not use soap on the underside of the cover.

3.  Please check with your Jacuzzi Dealer for recommended cover 

care and conditioning products. Condition using non-petroleum 

based conditioners to keep the vinyl supple and threads/stitching 

from drying out. Do not use solvents, abrasive cleaners or strong 

detergents. Do not use products that contain silicone or alcohol.

Place both hands on 

pillow with thumbs as 

shown.

Press inward  with 

thumbs to curl pillow 

lip inward so you can 

grab it with fingertips.

Flex pillow lip inward

2-3" to get a good

grip on the ends.

Gently pull outward on 

pillow to release mounting 

stud from receptacle on 

spa shell.

Wash pillow(s) in a mild detergent soap and warm water solution.  Never machine wash your pillows 

or attempt to clean them with a non-approved vinyl cleaning agent!

To reinstall pillows:  Simply align pillow over mounting stud receptacle, then gently push inward to 

snap in place.