Konica Minolta dynax-maxxum 5d 用户手册
50
A
DVANCED RECORDING
Single-frame and Continuous advance - to take
single or multiple images at one time (p. 51).
single or multiple images at one time (p. 51).
Self-timer - to delay the release of the shutter
by 10 or 2 seconds (p. 51).
by 10 or 2 seconds (p. 51).
The drive modes control the rate and
method of image capture. Single-frame
advance is the default drive mode and
is described in the basic recording
section on page 28. The drive mode is
set with the drive-mode selection
screen. Press the drive-mode button (1)
to open the screen.
method of image capture. Single-frame
advance is the default drive mode and
is described in the basic recording
section on page 28. The drive mode is
set with the drive-mode selection
screen. Press the drive-mode button (1)
to open the screen.
DRIVE MODES
Drive-mode indicator
Exposure bracketing - to take a series of 3
images with differing exposure (p. 52).
images with differing exposure (p. 52).
White-balance bracketing - to make 3 images
with differing white balance (p. 53) from a single
exposure.
with differing white balance (p. 53) from a single
exposure.
Options
Use the up/down keys of the controller to select the drive-mode group.
Use the left/right keys of the controller to highlight the drive-mode option.
Press the center button of the controller to select the drive mode. An indicator
is displayed on the monitor to confirm the selection.
is displayed on the monitor to confirm the selection.
Drive modes
Single-frame adv.
:func.
:select
:enter