Xerox docucolor 7000ap 用户手册
DocuColor 7000AP/8000AP Quick Start Guide
13
Exercises
4.
Lift handle 4a and carefully remove all
jammed paper, ensuring that all pieces are
jammed paper, ensuring that all pieces are
removed if the paper is torn. Turn the green
handle 4b to free any paper that is caught.
5.
Reposition green handle 4a.
6.
The Fuser area is on the right hand side of
the Paper Transport module. Lift handle 4c on
the Paper Transport module. Lift handle 4c on
the right hand side and pull to open.
7.
Lift up handle 4d until it stops and clear any
jammed paper. Rotate knob 4e in the
jammed paper. Rotate knob 4e in the
direction of the arrow on the knob to clear any
paper that is caught.
NOTE: Occasionally a sheet of paper wraps
around the heat roll. (The heat roll is visible when
handle 4d is up). DO NOT attempt to remove this
sheet of paper because the stripper fingers may be
damaged if you attempt this procedure. Call your
Xerox service representative to remove this piece
of paper.
around the heat roll. (The heat roll is visible when
handle 4d is up). DO NOT attempt to remove this
sheet of paper because the stripper fingers may be
damaged if you attempt this procedure. Call your
Xerox service representative to remove this piece
of paper.
8.
Reposition green handle 4d and close area
4c. Ensure these are firmly in place.
4c. Ensure these are firmly in place.
9.
Grasp handle 4 and slowly push in the Paper
Transport until it stops. Turn the handle in the
Transport until it stops. Turn the handle in the
direction of the arrow to lock the module in
place.
10.
Close the Right and Left Front Doors.
11.
Follow the instructions on the UI to restart
your print job.
your print job.
4a
4b
4c
4d
4e