Xerox docucolor 8000ap 用户手册
DocuColor 7000AP/8000AP Quick Start Guide
15
Exercises
High Capacity Stacker 80 (HCS80)
Perform the following steps to clear the HCS80 jam
in the Bypass area and resume printing.
1.
Remove any paper from the Top Tray.
2.
Lift the HCS80
Top Cover
.
3.
Lift the green handle, or handles, indicated on
the UI and remove all paper in the Bypass
the UI and remove all paper in the Bypass
area. Remove paper only from the areas
indicated.
4.
Close each green handle.
5.
Close the HCS80
Top Cover.
6.
If the UI indicates there is a jam in the digital
press, follow the instructions on the screen to
press, follow the instructions on the screen to
remove any paper in the area indicates. Refer
to the
Jam Clearance
section in the
Problem
Solving
chapter in this manual.
7.
Follow the instructions displayed on the
digital press UI to resume printing.
digital press UI to resume printing.
High Capacity Stacker/Stapler (HCSS)/Common Stacker/Stapler (CSS)
Read the following steps for more information on
how to clear a jam.
1.
Open the finisher Front Door. There are three
possible jam areas. Handle 1 moves down,
possible jam areas. Handle 1 moves down,
handle 2 moves to the right, and handle 3
moves up.
2.
Remove all jammed paper only from the area
indicated on the Touch Screen and the
indicated on the Touch Screen and the
finisher Control Panel Display. Do not remove
paper from any other areas.
3.
Reposition the handle.
4.
Close the finisher Front Door.
5.
Follow any instructions on the Touch Screen
to restart your print job.
to restart your print job.
1
2
3