ZyXEL Communications zyair g-302 用户手册

ZyXEL G-302 v3 User’s Guide

36

Chapter 3 ZyXEL Utility Configuration

Note: You can use WPA and WPA2 with the G-302 v3 only in Microsoft Windows XP 

or Windows 2000.

Figure 16   Security Settings: WPA/WPA2

The following table describes the labels in this screen. 

Next

Click Next to confirm your selections and advance to the Confirm Save screen. 

Refer to 

.  

Exit

Click Exit to return to the Site Survey screen without saving.

Table 6   Security Settings: WEP  (continued)

Table 7   Security Settings: WPA/WPA2

Encryption Type

The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are 

the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses 

a simple common password, instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to 

 for more information.

Authentication 

Type

Select an authentication method from the drop down list. Options are TLS, TTLS 

and PEAP.

Login Name

Enter a user name. 
This is the user name that you or an administrator set up on a RADIUS server.

Password

This field is not available when you select TLS in the Authentication Type field. 
Enter the password associated with the user name above. 

Certification

This field is only available when you select TLS in the Authentication Type field. 
Select a certificate used by the authentication server to authenticate the G-302 v3.

Note: You must first have a wired connection to a network and 

obtain the certificate(s) from a certificate authority (CA). 

Validate Server 

Certificate

Select the check box to check the certificate of the authentication server.