Bay Technical Associates BayTech DS72 用户手册

DS72 Host Module

Selection 1), the Host Module responds:

Select the probe port to enable or disable the SNMP change trap, the Host Module responds with the
change.

Select 2), from the Environmental Sensor Configuration Menu allows the administrator to identify the probe
type, the Host Module responds

Select 2), from the probe type menu allows the administrator to set the High and Low Temperature
range. Option 2 and 4 will enable/disable their corresponding SNMP traps.

Select 3), from the probe type menu allows the administrator to set the High and Low Humidity range.
Option 2 and 4 will enable/disable their corresponding SNMP traps.

Sel    Type        Name            Hi/En    Lo/En St/En
1   Contact     External Sensor1 N/A       N/A        Ds
2   Contact     External Sensor2 N/A       N/A        Ds
Enter Request :1

Selected State Change Trap is..... Disabled
Enable ? (Y/N), CR for no change) :y

Sel    Type      Name             Hi/En    Lo/En St/En
1   Contact     External Sensor1 N/A      N/A      En
2   Contact     External Sensor2 N/A      N/A      Ds
Enter Request :

For configuration of all sensors of selected type in system with a
single user-supplied value.

1...Contact
2...Temperature
3...Humidity
4...Air Flow
Enter Request :1

Selected State Change Trap is..... NP
Enable ? (Y/N), CR for no change) :
Enter Request :2

RPC/RPS External Environmental Sensor Configuration Menu
Sensor Number: All Name: all RPCs/RPSs Type: Temperature

  1...High Threshold (tenths of meas. unit): NP
  2...High Threshold Trap Enable: NP
  3...Low Threshold (tenths of meas. unit): NP
  4...Low Threshold Trap Enable: NP
Enter Request :