Chevrolet lumina 2001 用户手册

1. Open the trunk. The back

-

up lamp bulbs are in the

rear of the trunk lid.

2. Press the tab on the

socket, turn the socket
counterclockwise and 
pull it out.

3. To remove the bulb, pull it out of the socket. 

Do not twist the bulb.

4. Push the new bulb into the socket.

5. Reverse Steps 1 and 2 to reinstall the socket.

1. Grasp the front and rear center of the dome lamp cover

at the same time. Then squeeze and pull downward.
(To help pry the sides loose, a screwdriver may be
used as an aid during this procedure.)

2. Remove the old bulb from the small prongs

extending from the dome lamp base plate; hook the
new bulb onto the prongs.

3. To reinstall the dome lamp cover, center it over the

base plate, making sure both the cover and the 
base plate line up properly. Snap the cover firmly
into place.