briggs--stratton 5900302 用户手册

Operation

WARNING

AVOID SERIOUS INJURY OR DEATH FROM
ROLL OVER:

Keep roll bar in the raised position and use
seat belt.

THERE IS NO ROLL OVER PROTECTION WHEN
THE ROLL BAR IS DOWN

Lower the roll bar only when necessary and
NEVER remove it.

Do NOT use seat belt when the roll bar is down.

Raise the roll bar as soon as clearance permits.

Do NOT jump off if mower tips.

Figure 10. Raise & Lower the Roll Bar
A. Hair Pin Clip
B. Retainer Pin
C. Roll Bar
D. Rubber Stop

Raise & Lower the Roll Bar

To lower the roll bar:

1. Pull the hair pin clips (A, Figure 10) out of the

retainer pins (B).

2. Push or pull the top of the roll bar (C) forward

against the rubber stops (D) and remove the
retainer pins (B).

3. Lower the roll bar and reinstall the retainer pins

and hair pin clips to secure the roll bar in the
down position (see insert, Figure 10).

To raise the roll bar:

1. Pull the hair pin clips (A) out of the retainer pins

(B) and remove the retainer pins.

2. Raise the roll bar (C) until the rubber stops (D)

contact the upright tubes.

3. Push or pull the top of the roll bar forward against

the rubber stops and reinstall the retainer pins and
hair pin clips to secure the roll bar in the raised
position.

Not

for

Reproduction