Chevrolet corvette 2001 用户手册

You can also display number of miles (kilometers)
driven since you last started the vehicle if you press and
hold the RESET button for two seconds, then release.
The miles (or kilometers) since the last ignition cycle
will be set into the trip odometer.

Press the TRIP button until ELAP. TIME is displayed,
such as ELAP. TIME 00:00:00.00.

When the ignition is in ON, the Driver Information
Center (DIC) can be used as a stopwatch. The display
can show hours, minutes, seconds and hundredths of 
a second. The elapsed time indicator will record up to 
99 hours, 59 minutes and 59 seconds, then it will reset 
to zero and continue counting. (Hundredths are shown
up to 59 minutes, 59 seconds and 99 hundredths). The
display appears as ELAP. TIME 00:00:00.00 in the
elapsed time function.

You can start or stop the elapsed time by pressing
RESET. To reset the elapsed time to zero, stop the timer
by pressing RESET. Then press and hold RESET until
ELAP. TIME 00:00:00.00 appears in the DIC.

Press the TRIP button until the average speed is
displayed, such as:
D AVERAGE SPEED 62 MPH or
D AVERAGE SPEED 100 km/h
Press reset in this mode to start calculating the average
speed. Press and hold RESET to clear.

Press the TRIP button until the engine oil life is
displayed, such as OIL LIFE REMAIN 89%.

This is an estimate of the engine oil’s remaining useful
life. It will show 99% when the system is reset after an
oil change. It will alert you to change your oil on a
schedule consistent with your driving conditions.

When the remaining oil life is low, the system will alert
you with the message CHANGE OIL SOON.

When the oil life is down to zero, you will receive the
message CHANGE OIL NOW.