ZyXEL Communications P-870HW-I 用户手册
P-870HW-I1 User’s Guide
Chapter 6 Wireless LAN
103
6.4.6 General Wireless LAN Screen: 802.1x + Static WEP
Use this screen to enable and configure IEEE 802.1x authentication and static WEP encryption
in your wireless network. To open this screen, click Network > Wireless LAN, and set
Security Mode to 802.1x + Static WEP.
in your wireless network. To open this screen, click Network > Wireless LAN, and set
Security Mode to 802.1x + Static WEP.
Figure 51 Network > Wireless LAN > General > 802.1x + Static WEP
IP Address
Enter the IP address of the external accounting server in dotted decimal notation.
Port Number
Enter the port number of the external accounting server. You need not change this
value unless your network administrator instructs you to do so.
Shared Secret
Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the external accounting server and the ZyXEL Device. The key must be the
same on the external accounting server. The key is not sent over the network.
Table 39 Network > Wireless LAN > General > 802.1x + Dynamic WEP (continued)
LABEL
DESCRIPTION