Kompernass parkside phks 1450-kh 3141 cirkelsag 用户手册

Dear Customer, We are delighted that you have decided to purchase our high quality PHKS 1450 
circular saw. Please make sure you familiarise yourself fully with the way the equipment works 
before you use it for the first time and that you understand how to handle electrical power tools 
correctly. Please read the instructions        below and the accompanying safety advice      carefully. 
By doing this you will be able to work in complete safety and achieve better results. We hope you 
enjoy using your circular saw.

Sawing of solid wood, chipboard, plastic and aluminium. Please note that the blade pre-installed 
in the saw as supplied is intended for sawing wood only. Any other use or modification to the saw 
shall be considered as improper use and could give rise to considerable dangers.

ON - OFF switch

Safety switch

Parallel guide fence

Electronic speed control

with millimetre scale

Adjustable depth stop

Retractable guard

Sawdust outlet

Spindle lock

Bevel cutting capacity 

Illustration showing operation

with angle gauge

Depth of cut gauge

Guide plate

Wing screw

Nom. power consumption: 1450 W

Nom. voltage: 

230 V 50 Hz

Output torque: 

15 NM max. 

Weight: 

6.75 kg

No load speed:

1800 - 5000 rpm

The A-weighted noise level of the equipment 

Blade:

210 x 30 x 1.8 x 2.6 mm

is typically:

Sound pressure level: 107.5 dB(A)

Cutting depth at 90°:

0 - 75 mm

Sound power level :   120.5 dB(A)

Cutting depth at 45°:

0 - 50 mm 

Hand/arm vibration is typically less than 9.3 m/s

2

The PHKS 1450 circular saw has INTELLIGENT POWER CONTROL.
This automatic power delivery system ensures that for a particular 
speed range the power output remains constant when working 
on harder and more resistant materials. 

To be read in conjunction with the advice in the accompanying booklet on safety.

The PHKS 1450 circular saw is fitted with an electronic soft start system. This provides a short 
delay after the ON/OFF switch 

 

is actuated before the motor starts up.

Only actuate the spindle lock button 

after the saw has come to a standstill.

Before starting any work on the machine, e.g. setting the guide plate etc., always take the plug 
out of the socket.

Never remove chips or splinters while the equipment is operating - always remove the plug from 
the socket first.

n0

1 man#4_GB_(IRL)  10.03.2003  11:53 Uhr  Seite 4