Konica Minolta 7013 psc 用户手册

NetWare Configuration-19

6. If the Print Server is to be operated under Novell Directory Services, type in a 

Context entry and Preferred NDS Tree entry in the appropriate fields. Be sure to 

give the whole context, whether typed or typeless, and do not begin your context 

path with a trailing period (.). If you don't know your tree, type: whoami at the 

DOS command line. A typed context name example is:

7. In the default mode, the Print Server scans each queue which it is to service once 

per second. If you prefer a longer scan rate, you may enter the time between scans 

in seconds in the Print Queue Scan Rate field.

8. The Print Server Card will normally monitor the network to determine which 

frame type is being used for Novell. When it recognizes a type, it will assume the 

same frame type. Once it selects a frame type, the Print Server Card will only 

operate over that Novell frame type. Monitoring normally starts looking for IEEE 

802.3, then Ethernet II, then 802.3 SNAP, etc. If your network is using multiple 

frame types for Novell, you should bias the frame search to the desired type by 

setting the button next to the designation under Ethernet Frame Type.

9. You can Disable Bindery mode on the Print Server if  are operating in NDS mode 

only. To do so, click on that box. If you disable Bindery, the Print Server Card will 

not support Print Servers on a Bindery file server.

10. Once you have selected all desired settings and entered the desired NetWare infor-

mation, you may cause this information to be entered in the Print Server Card NV 

RAM by clicking on  Accept Settings. As with all value changes, if you have not 

entered the Print Server Card Management Password before, you must enter it in 

the appropriate space before clicking on  Accept Settings.

11. Entered values do not take effect until the Print Server Card is reset or power 

cycled. You may reset from MAP or the Web Browser  by returning to the Home 

or Network Administration page,  and click on Reset under System.  Now click 

on Reset Unit. Alternatively, you may power cycle the printer. The new NetWare 

values should now be in effect.