Konica Minolta 7013 psc 用户手册

NetWare Configuration-23

NWSetup lets you do the entire setup procedure for Novell NetWare and your Net-
work Interface Card using only one program. This program combines the following 
configuration steps: 

•  Lets you set up the Novell file servers and print servers for NetWare printing, instead 

of using NetWare utilities.

•  Allows you to set up your print server printers fsor network printing.

In order to install NWSetup, you must do the following:

1. Place the CD ROM into your CD drive.

2. Click on CD ROM Table of Contents when the menu appears.

Note: If you do not have Acrobat Reader 3.0x or higher installed, then you should 
click on "Install Acrobat Reader" first.

3. Click on Installation/Configuration Programs.

4. Click on NWSetup Software.

5. Read the information screen. Click where indicated to start the installation.

Or you may install NWSetup directly from the CD-ROM by doing the following:

1. Place the CD-ROM into your CD drive.

2. Select RUN from the Windows Start Menu.

3. Type <CD-Drive>:\NWSETUP\DISK1\SETUP.EXE

4. Follow the instructions in the SETUP program.

When you install NWSetup, a program icon is placed on your desktop. Click on the 
NWSetup icon to start the program. 

Note: If you are configuring for NDS (Directory Services), make sure you are logged 
into the correct tree and context before you initiate this program.

NWSetup displays a list of all Network Interface Cards available on your network 
after you initiate the program. The Network Interface Card appears with its serial