Konica Minolta 7013 psc 用户手册
Windows Peer-to-Peer Printing-2
On power up, the Print Server Card sniffs the network to see if there is Novell activity.
If there is, it will use the same frame type and the local network number that it senses.
If, in addition, the NIC can log on to a file server, it will assume that Novell is nor-
mally used and will store this frame type and new number in NV RAM so that, when
it comes up again, it will not have to spend the time sensing (which can take some
time). However, if the NIC cannot attach to a file server, it will use the sensed values,
but will not store them.
If there is, it will use the same frame type and the local network number that it senses.
If, in addition, the NIC can log on to a file server, it will assume that Novell is nor-
mally used and will store this frame type and new number in NV RAM so that, when
it comes up again, it will not have to spend the time sensing (which can take some
time). However, if the NIC cannot attach to a file server, it will use the sensed values,
but will not store them.
If the NIC does not see any Novell activity, it will use 802.2 on 802.3 as a frame type
and will assign itself a network number of 0. The frame type and network number
being used is reported on the status and configuration sheet.
and will assign itself a network number of 0. The frame type and network number
being used is reported on the status and configuration sheet.
If a NIC is being moved from a site that had active Novell to a site that does not, the
unit should be reset to factory default to clear the frame type and network number
information.
unit should be reset to factory default to clear the frame type and network number
information.
5.1.2 Installation and Operation
Install the Windows IPX Peer-to-Peer redirector as follows:
1. Put the CD ROM which came with your NIC into the CD ROM drive.
2. From the Windows main window, click on Start.
3. Click on Run.
4. From Run, type <CDROM drive>:\IPX-P2P\SETUP.EXE.
5. Click on OK.
6. At the IPX Peer-to-Peer Setup screen, click on Next.
Note: If setup detected a previous installation of the IPX Peer-to-Peer Redirector, it will
prompt you to have Setup delete the old driver and continue the installation proce-
dure. Click on Yes or No.
Once the redirector is installed, each printer on the network that supports this peer-to-
peer capability will appear as a Port under Printer Properties.
peer capability will appear as a Port under Printer Properties.
To use the Peer-to-Peer connection, create a logical printer using the Add Printer
Wizard according to the instructions for your printer. Set up the printer as a LOCAL
printer. Use the driver that came with your printer.
Wizard according to the instructions for your printer. Set up the printer as a LOCAL
printer. Use the driver that came with your printer.
When the Add Printer Wizard asks you to choose the Port, select the name of the
Peer-to-Peer printer you wish to print to. When you complete the installation, select
the Print Test Page option.
Peer-to-Peer printer you wish to print to. When you complete the installation, select
the Print Test Page option.