Konica Minolta 7013 psc 用户手册

TCP/IP Configuration-31

Note:

The device name varies depending on the computer and its peripheral designa-

tions. The first BSD floppy device is often called rfd0.

5. After performing the tar, the system will display a list of Print Server Card files 

copied by the tar. At this point, go to the specific section for your system for 

instructions on running the installation script.

There will be certain options in executing the script for various systems. 

One of the questions posed by the install script is whether the printer is a PostScript 
printer. If you answered no to this question, the install script uses an input filter (infil-
ter) that supplies CR/LF translation to print ASCII files on a PCL printer. If you 
answered yes to this question, your printcap file will reference psfilter which offers 
easy ASCII-to-PostScript conversion. Normal PostScript format files are not affected. 
Proprietary and public domain filters are available for broader filtering capabilities.

The Print Server Card ships with an input filter called psfilter and an output filter 
called psbanner to print PostScript banners.

You may wish to change infilter or outfilter entries in the /etc/printcap file. The fol-
lowing is a sample printcap entry using these filters:

<print_name>  |  Print Server Card printer:\

:lp=/dev/nic/<printer_name>:\

:if=/usr/nic/psfilter:\

:of=/usr/nic/psbanner:\

:sd=/usr/spool/<printer_name>:

BSD/ULTRIX/AIX/
SCO

tar -xvf/dev/rfd0

System V

tar -xvf/dev/rdsk/f13ht

System V/Solaris 2.3

tar -xvf/dev/rdiskette