Kenwood LZ-760R 用户手册

English

Before Use

2WARNING

To prevent injury and/or fire, take the following
precautions:

• Ensure that the unit is securely installed. Otherwise it may fly

out of place during collisions and other jolts.

• When extending the ignition, battery or ground wires,

make sure to use automotive-grade wires or other wires
with an area of 0.75mm (AWG18) or more to prevent cable
deterioration and damage to the cable coating.

• To prevent short circuits, never put or leave any metallic

objects (e.g., coins or metal tools) inside the unit.

• If the unit starts to emit smoke or strange smells, turn off the

power immediately and consult your Kenwood dealer.

• Do not touch the liquid crystal fluid if the LCD is damaged

or broken due to shock. The liquid crystal fluid may be
dangerous to your health or even fatal.

If the liquid crystal fluid from the LCD contacts your body or

clothing, wash it off with soap immediately.

2CAUTION

To prevent damage to the machine, take the
following precautions:

• Make sure to ground the unit to a negative 12V DC power

supply.

• Do not open the top or bottom covers of the unit.
• Do not install the unit in a spot exposed to direct sunlight or

excessive heat or humidity. Also avoid places with too much
dust or the possibility of water splashing.

• Do not subject the faceplate to excessive shock, as it is a

piece of precision equipment.

• When replacing a fuse, only use a new one with the

prescribed rating. Using a fuse with the wrong rating may
cause your unit to malfunction.

• To prevent short circuits when replacing a fuse, first

disconnect the wiring harness.

• Do not use any screws except for the ones provided. The use

of improper screws might result in damage to the main unit.

• You cannot view video pictures whilst the vehicle is moving.

To enjoy TV/video pictures, find a safe place to park and
engage the parking brake.

NOTE

• If you experience problems during installation, consult your

Kenwood dealer.

• If the unit does not seem to be working right, try pressing

the reset button first. If that does not solve the problem,
consult your Kenwood dealer.

Reset button

• Even if the Reset button is pressed, values set for individual

items are not cleared. To initialize set values, perform the
operation mentioned in <Initializing the User Settings>
(page 8).

Cleaning the Unit

If the faceplate of this unit is stained, wipe it with a dry soft
cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off with a cloth
moistened with neutral cleaner, then wipe neutral detergent
off.

2CAUTION

Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth or
using a volatile liquid such as thinner or alcohol may scratch
the surface or erases characters.

Screen brightness during low temperatures

When the temperature of the unit falls such as during winter,
the liquid crystal panel’s screen will become darker than usual.
Normal brightness will return after using the monitor for a
while.

LZ-760R_E_(En).indd 3

05.6.7 10:29:04 AM