Konica Minolta su-1 用户手册
1 Introduction
15
Note
5.
Using the 10-key pad, enter the IP
address of the Internet fax/network
scanner.
address of the Internet fax/network
scanner.
• The screen at the right shows an
example of an entered IP address.
For the appropriate setting, consult
the network administrator.
For the appropriate setting, consult
the network administrator.
6.
Press the
[Yes]
key.
The “
NETWORK(FAX/SCAN)
”
menu appears again.
To set the “SUBNET MASK” function
1.
From the “
NETWORK(FAX/SCAN)
”
menu of the Utility mode, press the
[2]
key from the 10-key pad to select
“
“
SUBNET MASK
”.
2.
Using the 10-key pad, enter the subnet
mask value.
mask value.
• The screen at the right shows an
example of an entered subnet mask.
For the appropriate setting, consult
the network administrator.
For the appropriate setting, consult
the network administrator.
3.
Press the
[Yes]
key.
The “
NETWORK(FAX/SCAN)
”
menu appears again.
• “AUTO” is available if a DHCP server is on the network. If “AUTO”
is selected, it will not be necessary to specify the subnet mask or
gateway settings.
gateway settings.
• If a fixed IP address has been set, you must select “IP Address in
NVRAM” in the enclosed PageScope Light. Make this setting in
the “TCP/IP Configuration” menu on the “Network” tab. For more
details, refer to the PageScope Light for Di152f/Di183f Scanner
User Manual.
the “TCP/IP Configuration” menu on the “Network” tab. For more
details, refer to the PageScope Light for Di152f/Di183f Scanner
User Manual.
SU-1-e.book Page 15 Friday, May 24, 2002 10:52 AM