Konica Minolta km-7145 copier 用户手册
2-18
Turning On the Power Switch
To Turn On the Power
Usually, the main power switch should be kept ON so that the machine may function
as facsimile or printer.
The main power switch is located on the rear left side of the main body.
When the main power switch is turned ON, the main power indicator located on the far
left side of the control panel will go on.
as facsimile or printer.
The main power switch is located on the rear left side of the main body.
When the main power switch is turned ON, the main power indicator located on the far
left side of the control panel will go on.
When turning the main power switch OFF then ON,
check that the main
power
indicator located on the far left side of the control panel goes off
before turning it ON again.
To turn ON the power by the power switch:
1.
Turn ON the power switch.
The power switch is located on the far left side of the control panel.
Warm-up takes approximately 30 seconds.
Warm-up takes approximately 30 seconds.
2.
The Basic Screen will be displayed.
The message on the Basic Screen will inform you that copying job is possible.