Konica Minolta pi6500pro pcl6 printer driver 用户手册
2
Installing the Printer Driver
2-18
Pi6500Pro
Displaying a Property Sheet from an Application Menu
<Windows 2000>
1
Select [Print...] from the [File] menu of the application.
2
Make sure that the “Select Printer” of the “General” is “Minolta
Pi6500Pro PCL6”: If “Minolta Pi6500Pro PCL6” is not listed, click
[
Pi6500Pro PCL6”: If “Minolta Pi6500Pro PCL6” is not listed, click
[
Ä
] and, from the menu that will then appear, select “Minolta
Pi6500Pro PCL6.”
<Windows NT 4.0>
1
Select [Print...] from the [File] menu of the application.
2
Make sure that the “Name” of “Printer” is “Minolta Pi6500Pro PCL6”:
If “Minolta Pi6500Pro PCL6” is not listed, click [
If “Minolta Pi6500Pro PCL6” is not listed, click [
Ä
] and, from the
menu that will then appear, select “Minolta Pi6500Pro PCL6.”
3
Click the [Properties] button. This will display the property sheet.
This method allows you to set the number of copies and type of paper for
each document.
each document.
Note that the settings made on the property sheet accessed through the
application are valid only for that particular application.
application are valid only for that particular application.
TIPS
To set the Device Options setting, which need not be changed unless
device is changed, open from the printer folder to set.
To set the Device Options setting, which need not be changed unless
device is changed, open from the printer folder to set.
To show a property sheet other than Setup, click the corresponding
tab located on the top part of the screen.
tab located on the top part of the screen.
NOTE
è
The steps to display a property sheet may be different depending on
the application. Follow the correct procedure according to the
application. The procedure above is based on the application
WordPad.
the application. Follow the correct procedure according to the
application. The procedure above is based on the application
WordPad.