Konica Minolta pi6500pro pcl6 printer driver 用户手册
Property Sheets
3
Pi6500Pro
3-13
6. Shading
Specify the density of the characters.
Setting range: 5%~100% (in 1% steps)
7. Angle
Specify the angle of the characters with respect to the paper.
m
Fixed Angle:
Standard fixed angle of the driver.
Available settings:
Horizontal, Diagonal, Vertical, User Setting
Standard fixed angle of the driver.
Available settings:
Horizontal, Diagonal, Vertical, User Setting
m
User Setting:
If you select User Setting from Fixed Angle, you can set any
desired angle.
Setting range: -180°~+180° (A – (minus) value rotates the
characters clockwise, 0 leaves the characters parallel to the
paper, and a + (plus) value rotates the characters
counterclockwise.)
If you select User Setting from Fixed Angle, you can set any
desired angle.
Setting range: -180°~+180° (A – (minus) value rotates the
characters clockwise, 0 leaves the characters parallel to the
paper, and a + (plus) value rotates the characters
counterclockwise.)
8. Position
Specify the position at which you wish to print a watermark.
m
Center:
The watermark is printed at the center of the paper.
The watermark is printed at the center of the paper.
m
User Setting:
You can specify a position by entering numbers in the Horizontal
and Vertical boxes.
Setting values:
Horizontal: -999pt~999pt (in 1pt steps)
Vertical:
You can specify a position by entering numbers in the Horizontal
and Vertical boxes.
Setting values:
Horizontal: -999pt~999pt (in 1pt steps)
Vertical:
-999pt~999pt (in 1pt steps)
(72pt = 1inch)
(72pt = 1inch)
TIPS
Specify the position from the center. The Horizontal positive direction
is to the right, and the Vertical positive direction is upward.
Specify the position from the center. The Horizontal positive direction
is to the right, and the Vertical positive direction is upward.
You can view the set contents using (1) Preview.