Konica Minolta k8020 用户手册
1
1.5 Turning the Copier On and Off
1-16
Konica 8020/8031
B
e
fo
re
Ma
ki
ng C
opi
es
Ch
apte
r 1
1.5
Turning the Copier On and Off
To turn the copier on
➜
Set the power switch to “I”.
When the copier is turned on
1
The indicator on the [START] key lights up in orange.
A screen indicating that the machine is starting up appears.
2
After a few seconds, the message “Now warming-up. Ready to scan.” appears
on the touch panel. When the indicator on the [START] key lights up in green,
a job can be queued.
on the touch panel. When the indicator on the [START] key lights up in green,
a job can be queued.
Queuing a job during warm-up
➜
An image can be scanned (a job can be queued) while the machine warms up
after it is turned on. If a job is queued, printing begins after the copier has fin-
ished warming up (after about 5 minutes at normal room temperature (20 °C)).
after it is turned on. If a job is queued, printing begins after the copier has fin-
ished warming up (after about 5 minutes at normal room temperature (20 °C)).
Auto Reset
G
The machine automatically resets all modes and functions to their default set-
tings if one minute has passed without the machine performing any operations.
tings if one minute has passed without the machine performing any operations.
G
If the optional key counter is removed, the machine assumes that the user has
changed and automatically resets all modes and functions to their default
settings.
changed and automatically resets all modes and functions to their default
settings.
G
When the touch panel is reset, all settings that have not been stored, such as
the number of copies, return to their default settings (p. 1-20).
the number of copies, return to their default settings (p. 1-20).