Konica Minolta k8020 用户手册
1.5 Turning the Copier On and Off
1
Konica 8020/8031
1-19
B
e
fo
re
Ma
ki
ng C
opi
es
Ch
apte
r 1
To turn the copier off
1
Touch [Job Log] to check that no
jobs are queued.
jobs are queued.
2
If any copies or printouts remain in
the output tray, remove them.
the output tray, remove them.
3
Set the power switch to “O”.
✎
Note
Do not turn off the copier while it is making copies or printing, otherwise a paper
misfeed may occur.
Do not turn off the copier while it is making copies or printing, otherwise a paper
misfeed may occur.
Do not turn off the copier while it is scanning or sending or receiving data, oth-
erwise all scanned data or transmission data will be deleted.
erwise all scanned data or transmission data will be deleted.
Do not turn off the copier while a queued job or stored data is waiting to be print-
ed, otherwise the jobs will be deleted.
ed, otherwise the jobs will be deleted.
When the copier is turned off
G
The following are cleared.
❍
Settings that are not programmed, such as the number of copies
❍
Jobs queued to be printed
❍
Data scanned using the “Scan to Memory” function
❍
Jobs saved with “Memory Recall” function
G
Stored zoom ratios, programmed Copy mode settings, Utility mode settings and
UserBox settings are not erased.
UserBox settings are not erased.