Konica Minolta k8020 用户手册
4
4.2 Feeding the Document
4-10
Konica 8020/8031
O
ri
g
inal
Doc
u
m
ent
s
Chap
ter
4
Manual Feeding
Place the document directly on the platen glass, and then scan. Each page of the
document must be positioned manually (i.e., the previous one must be removed
and the next one placed on the platen glass).
document must be positioned manually (i.e., the previous one must be removed
and the next one placed on the platen glass).
This method is best with books and other documents that cannot be fed through the
duplexing document feeder.
duplexing document feeder.
1
Lift open the platen cover, or the
duplexing document feeder if it is
installed.
duplexing document feeder if it is
installed.
❍
Lift open the platen cover, or
the duplexing document feeder
if it is installed, 15° or more,
otherwise the document size
will not be detected.
the duplexing document feeder
if it is installed, 15° or more,
otherwise the document size
will not be detected.
2
Position the document face down
onto the platen glass with the top
of the document toward either the
rear or the left side of the copier.
onto the platen glass with the top
of the document toward either the
rear or the left side of the copier.
3
Align the document with the docu-
ment scales.
ment scales.
When loaded crosswise:
When loaded lengthwise: