Konica Minolta k8020 用户手册
5.2 Selecting an Output Setting
5
Konica 8020/8031
5-5
Sp
ec
ify
ing Co
py
Se
tti
ngs
Ch
apte
r 5
❍
For details on the “User’s Choice” functions, refer to “Specifying Default Set-
tings (“User’s Choice” Functions)” in the Administrator Operations volume.
tings (“User’s Choice” Functions)” in the Administrator Operations volume.
Stapling (with finisher FS-135 installed)
The copies are bound together with a staple in the corner.
However, stapling is only performed if the following conditions are met.
G
The number of copies is set to between 2 and 30.
G
If standard-size paper is used, the paper sizes must be A3 L, A4 L and A4 C.
G
If nonstandard-size paper is used, the paper width must be between 182 mm
and 297 mm.
and 297 mm.
G
If nonstandard-size paper is used, the paper length must be between 182 mm
and 432 mm.
and 432 mm.
G
The copier must not enter Interrupt mode.
Stapling (with finisher FS-231 installed)
The copies are bound together with a staple. Either the “Corner Staple” or the “2-
Point Staple” Output setting can be selected.
Point Staple” Output setting can be selected.
However, stapling is only performed if the following conditions are met.
G
The number of copies is set to between 2 and 50. (However, if the paper length
is 300 mm or more, the number of copies can only be set to 25 or less.)
is 300 mm or more, the number of copies can only be set to 25 or less.)
G
If standard-size paper is used, the paper sizes must be A3 L, A4 L and A4 C.
G
If nonstandard-size paper is used, the paper width must be between 182 mm
and 297 mm.
and 297 mm.
G
If nonstandard-size paper is used, the paper length must be between 182 mm
and 432 mm.
and 432 mm.
G
The copier must not enter Interrupt mode.
Hole-Punching
Two holes for filing copies in binders can be punched. The position of the punched
holes can be specified along the left side or along the top.
holes can be specified along the left side or along the top.
However, hole-punching is only performed if the following conditions are met.
G
Finisher FS-231 is installed.
G
Punch kit PK-131 is installed.
G
If standard-size paper is used, the paper sizes must be A3 L and A4 C.
G
If nonstandard-size paper is used, the paper width must be between 182 mm
and 297 mm.
and 297 mm.
G
If nonstandard-size paper is used, the paper length must be between 182 mm
and 432 mm.
and 432 mm.
G
The copier must not enter Interrupt mode.