Konica Minolta 7415 ev1 用户手册
1-6
2. Installing the Copier
Saf
ety Not
es
Ch
ap
te
r 1
CAUTION: Temperature and Humidity
• Keep away from direct sunlight, heat sources such as stoves, cool air from an air conditioner and
hot air from a heater.
• Avoid any environment that is outside the range shown below:
Temperature: 10–30°C with a fluctuation of up to 10°C per hour.
Humidity: 15–85% with a fluctuation of up to 20% per hour.
Humidity: 15–85% with a fluctuation of up to 20% per hour.
CAUTION: Ventilation
• Maintain the installation place well-ventilated.
• Keep away from dust or corrosive gases. These materials may cause poor image quality.
• During the use of machine, the machine generates ozone but in an insufficient amount to cause
• Keep away from dust or corrosive gases. These materials may cause poor image quality.
• During the use of machine, the machine generates ozone but in an insufficient amount to cause
any hazard to the human body.
However, if the machine is used in a poorly ventilated room, many copies made, or plural
copiers are used at the same time, an odor may be detected, ensure adequate ventilation for a
comfortable working environment.
However, if the machine is used in a poorly ventilated room, many copies made, or plural
copiers are used at the same time, an odor may be detected, ensure adequate ventilation for a
comfortable working environment.
CAUTION: Vibration
Do not install on a floor which is subject to vibration or is not level.
CAUTION: Installation Space
Allow sufficient space for facilitating copy operation, changing parts, and periodic inspection.
Especially leave an adequate space behind the machine to let hot air out from the rear fan.
Especially leave an adequate space behind the machine to let hot air out from the rear fan.
* At least 150 mm of space is needed on the right and back sides of the unit to ensure proper ventilation.
* The dimensions of the model shown include an Automatic Document Feeder and Paper Feed Unit.
* The dimensions of the model shown include an Automatic Document Feeder and Paper Feed Unit.
Scale: mm
C4007O090CA
562
936
692
911
645