Konica Minolta 7415 ev1 用户手册
5-4
When
an Indicator Lights Up
Chap
te
r 5
2. The Toner Empty Indicator
The error indicator displayed here will appear
when the toner supply inside of the supply unit
has been depleted. The machine will not be
operable under these circumstances.
Follow the procedure provided below to replace
the supply unit when this indicator is displayed.
when the toner supply inside of the supply unit
has been depleted. The machine will not be
operable under these circumstances.
Follow the procedure provided below to replace
the supply unit when this indicator is displayed.
C4007O038CA
How to replace the supply unit
NOTE
Be careful not to touch the areas marked
Be careful not to touch the areas marked
with bare hands.
Pull the Lock Release Lever and open the
Upper Half of Machine.
Upper Half of Machine.
Remove the supply unit.
NOTE
The metal parts within the machine are hot.
Avoid placing your hands in direct contact with
the metal fittings within the machine to avoid
injury.
The metal parts within the machine are hot.
Avoid placing your hands in direct contact with
the metal fittings within the machine to avoid
injury.
Remove the new supply unit from its
protective packaging.
protective packaging.
Holding it with both hands, shake it 4 or 5
times in the direction of the arrows to
distribute the toner evenly.
times in the direction of the arrows to
distribute the toner evenly.
Install a new supply unit.
CAUTION: HOT
1
C4007O109CA
2
C4007O110CA
3
4
C4007O111CA
5
C4007O112CA