Furuno gp-30-35 用户手册

9. Press ▲ or ▼ to display 6.

10.Press  s to send the cursor to the next

digit.

11. Press ▲ or ▼ to display 3.

12.Press  s to send the cursor to the last

digit.

13.Press ▲ or ▼ to display 0.

14.Press the [ENT] key.

15.Press the [MENU] key twice to finish.

The simulator display provides simulated
operation of this unit. You may set the speed
manually and the course manually or auto-
matically. All controls are operative – you
may enter marks, set destination, etc.

1. Press the [MENU] key twice to display

the MAIN MENU.

2. Select SYS SETUP and press the [ENT]

key.

3. Select SIMULATOR? and press the

[ENT] key.

°

°

4. Press the [ENT] key.

5. Select ON and press the [ENT] key.

6. Press the [ENT] key, enter speed to use

for the simulation with the Cursor Pad,
and press the [ENT] key.

7. Press the [ENT] key.

8. Select course entry method (AUTO or

MANU) and press the [ENT] key. For
manual entry of course, press the [ENT]
key again, enter course with the Cursor
Pad, and press the [ENT] key again. (The
AUTO course tracks a circular course.)

9. Press the [ENT] key, enter latitude (usu-

ally current latitude) with the Cursor Pad,
and press the [ENT] key.

10.Press the [ENT] key, enter longitude

(usually current longitude), and press the
[ENT] key.

11. Press the [MENU] key twice.

12.Select the PLOTTER display with the

[DISP] key. SIM appears at the upper
left-hand corner when the simulator dis-
play is active.

SIM

n

m

CSE:

°

SPD:

k

t

°

°

Course traced
in AUTO course

13.To turn off the simulator display, select

OFF on the MODE line of the SIMU-
LATOR menu, press the [ENT] key, and
press the [MENU] key twice to finish.

Note: If the power is reset while the simu-
lator display is in use, the indication SIMU-
LATION MODE appears in addition to the
indication SIM.