Konica Minolta SU2 用户手册
5
Features of the Network Functions
5-8
Scanner Mode & Page Scope Light
5.7
Scan to PC (SMTP)
G
Scan data can be sent as TIFF or PDF files to client computers using
SMTP.
SMTP.
G
From the client computer, the enclosed IP Scanner application must
be used to first specify the folder where data is saved. In addition, the
IP Scanner application can be set to save the data in a folder that was
created using the name of the one-touch key.
be used to first specify the folder where data is saved. In addition, the
IP Scanner application can be set to save the data in a folder that was
created using the name of the one-touch key.
G
In order to receive the data at a client computer and save it as an
image file, the enclosed utilities IP Scanner and Image Receiver are
required.
image file, the enclosed utilities IP Scanner and Image Receiver are
required.
G
If there is a DHCP server on the network, this function may not operate
correctly since IP addresses are automatically distributed to each
computer. In this case, specify a fixed IP address for the computer or
use IP Scanner.
correctly since IP addresses are automatically distributed to each
computer. In this case, specify a fixed IP address for the computer or
use IP Scanner.
1
Program a one-touch key with the IP address of the computer
receiving the data.
receiving the data.
2
Using the same procedure for sending e-mail messages, specify that
the data is to be sent to a computer.
the data is to be sent to a computer.
3
The sent scan data is received by the recipient computer.
4
The IP Scanner application converts the data to a TIFF or PDF file,
then saves the file in the specified folder.
then saves the file in the specified folder.
Client computer
Intranet