Nortel Networks 5399 用户手册
2-33
Chapter 2
Installing the Model 5399 Remote Access Concentrator Module
Nortel Networks 5399 Access Switch Hardware Installation Guide
Installing to and Loading from a UNIX Host
This section contains a description of what you need to do to install the
Remote Access Concentrator module’s operational software and image
to a UNIX host. See the Remote Annex Administrator’s Guide for UNIX
for more details.
Remote Access Concentrator module’s operational software and image
to a UNIX host. See the Remote Annex Administrator’s Guide for UNIX
for more details.
1.
Install the image on a UNIX host. The software installation
notes describe how to do this.
notes describe how to do this.
2.
Execute the ROM Monitor addr command:
•
Enter the module’s Internet address.
•
Modify any other parameters that the Remote Access
Concentrator may require for the initial boot, i.e., the
preferred load host’s Internet address and the subnet
mask (see
Concentrator may require for the initial boot, i.e., the
preferred load host’s Internet address and the subnet
mask (see
3.
Execute the boot command.
After successful execution of the boot command, the module is
up and running (see
up and running (see
).
If you have a configured BOOTP server, boot the
Remote Access Concentrator module. Otherwise,
continue to the next step.
Remote Access Concentrator module. Otherwise,
continue to the next step.