Nortel Networks 5399 用户手册
3-3
Chapter 3
ROM Monitor Commands
Nortel Networks 5399 Access Switch Hardware Installation Guide
Table 3-1. ROM Monitor Commands (continued)
Command
Description
Use
config
Displays the current
hardware configuration
and revision levels.
hardware configuration
and revision levels.
Identifying your
hardware, memory, and
ROM versions.
hardware, memory, and
ROM versions.
erase
Erases non-volatile
memory.
memory.
Clearing out old
parameters.
parameters.
help
Displays the list of ROM
Monitor commands.
Monitor commands.
Referencing the ROM
monitor commands.
monitor commands.
image [-d | <file>]
Displays and/or sets the
load image and tftp load
dump names.
load image and tftp load
dump names.
Loading an image that
differs from the default.
differs from the default.
lat_key [-d]
Sets the LAT key.
Connecting to a DEC
VMS host.
VMS host.
net
Executes an Ethernet
transceiver loopback
test.
transceiver loopback
test.
Checking your Ethernet
connection.
connection.
ping
Sends ICMP
ECHO_REQUEST
datagram to a host or
gateway.
ECHO_REQUEST
datagram to a host or
gateway.
Checking to see if a host
or gateway can be
reached.
or gateway can be
reached.
ports [-d]
Shows the current status
of a WAN interface port.
of a WAN interface port.
Testing a WAN interface
port or modem hardware.
port or modem hardware.
sequence [-d |
<list>]
<list>]
Displays and edits the
load/dump interface list.
load/dump interface list.
Checking or changing
the load/dump interface
list.
the load/dump interface
list.
stats
Displays current network
statistics gathered by the
ROM.
statistics gathered by the
ROM.
Checking the network
resources.
resources.