National Instruments NI PCIe-8360 用户手册

Clean the NI PXI-8360 and NI PCIe-8360 with a soft nonmetallic brush. Make 

sure that the device is completely dry and free from contaminants before returning it to 
service.

For full EMC compliance, operate this device with shielded cabling. In addition, all 

covers and filler panels must be installed. Refer to the Declaration of Conformity (DoC) 
for this product for any additional regulatory compliance information. To obtain the DoC 
for this product, visit

ni.com/certification

, search by model number or product line, 

and click the appropriate link in the Certification column.

This product is designed to meet the requirements of the following 
standards of safety for electrical equipment for measurement, control, 
and laboratory use:

•

IEC 61010-1, EN 61010-1

•

UL 61010-1

•

CAN/CSA-C22.2 No. 61010-1

For UL and other safety certifications, refer to the product label or visit 

ni.com/certification

, search by model number or product line, and click the 

appropriate link in the Certification column.

Emissions................................................EN 55011 Class A at 10 m. 

FCC Part 15A above 1 GHz

Immunity ................................................EN 61326:1997 + A2:2001, 

Table 1

CE, C-Tick, and FCC Part 15 (Class A) Compliant

For EMC compliance, operate this device with shielded cabling.

This product meets the essential requirements of applicable European 
Directives, as amended for CE marking, as follows:

Low-Voltage Directive (safety)..............73/23/EEC

Electromagnetic Compatibility 
Directive (EMC) .....................................89/336/EEC