National Instruments SCXI -1125 用户手册

To create a virtual channel, complete the following steps:

1.

Right-click Data Neighborhood and select Create New.

2.

Select Traditional NI-DAQ Virtual Channel and click Finish.

3.

Click Add Channel.

4.

Select Analog Input from the drop-down list and click Next.

5.

Enter the Channel Name and Channel Description, and click Next.

6.

Select Voltage from the drop-down list and click Next.

7.

Enter the units and input range, and click Next.

8.

Select the appropriate scaling option and click Next.

9.

Enter the following information:

10. What DAQ hardware will be used? from the drop-down list.

a.

What channel on your DAQ hardware? from the drop-down list.

b.

Which analog input mode will be used? from the drop-down list.

11. Click Finish.

This section describes how to take measurements using test panels in order 
to verify signal, and configuring and installing a system in NI-DAQmx and 
Traditional NI-DAQ (Legacy).

You can verify the signals on the SCXI-1125 using NI-DAQmx by 
completing the following steps:

1.

Expand Data Neighborhood.

2.

Expand NI-DAQmx Tasks.

3.

Click the task.

4.

Click the Add Channels or Remove Channels button to add/remove 
channels.

5.

In the window that appears, click the + next to the module of interest.

6.

Select the channel(s) you want to verify. You can select a block of 
channels by holding down the <Shift> key or multiple channels by 
holding down the <Ctrl> key. Click OK.

7.

Enter the appropriate information on the Settings tab.