Lenoxx Electronics HT-377 用户手册

IB-HT377-WM-E-050405

LOCATION OF CONTROLS

FRONT PANEL

1. REMOTE SENSOR - Receives the signal from

the REMOTE CONTROL (aim the R E M O TE
control towards this sensor).

2. ON/STANDBY button - Press to switch the

set to on or standby mode.

3. ON/STANDBY indicator - This indicator has

2 modes: flashing and steadily on (slow flashing
indicates the set is in standby, steadily on indicates
the  set  is  on).  When  the  set  is  turned  to  ON,
pressing the ON/STANDBY button on the main
set  or  on  the  REMOTE  CONTROL  will  turn
the set to the standby mode, the indicator will
become  slow  flashing.
NOTE:  The  power  switch  on  the  back  of  the

main set must be ON.

4. VOLUME  +  button  -  Increases  the  volume.
5. VOLUME  -  button  -  Decreases  the  volume.
6. SOURCE  button  -  Press  to  select  the  sound

input source you want: DVD or MP3/AUX.

7. DVD indicator - For DVD sound use, press the

SOURCE button on the main set or on the remote
control till this lights.

8. MP3 indicator - For MP3, PC or other component’s

output sound use, press the SOURCE button on
the main set or on the remote control till this lights.

9. DVD AUDIO INPUT jacks - Connect to the

audio output of a DVD player or other component
with AUDIO output jacks to have 2.1 channel
sound.

3
4

5
6

STAN DBY

VOL

SOURCE

DVD

MP3

10. MP3/AUX INPUT jack - Connect to the audio

output of an MP3 or PC or tape deck or other
component using a 3.5 mm audio output plug.

11. LEFT SPEAKER jacks - Connect one of the

SPEAKERS to the grey and black terminals.

12. RIGHT SPEAKER jacks - Connect one of the

SPEAKERS to the grey and black terminals.

13. FUSE HOLDER with screw cover.
14. AC LINE CORD - Connect to a 120V/60Hz

AC standard wall outlet.

15. POWER switch - Press to power the set on or off.

NOTE: This switch must be ON in order to be
able to use the ON/STANDBY button on the
main set or on the REMOTE CONTROL.

BACK OF MAIN SET
(SUBWOOFER)

IB-HT377-WM-E-050405.pmd

6/2/2005, 2:15 PM