Konica Minolta ip421ev211 用户手册

Print Controller INSTRUCTION MANUAL  1-5

● Print Controller Hardware Configuration

Configuration of the print controller is as follows:

Control board

CPU: Pentium MMX-166 MHz

Program memory: FLASH ROM (Compact Flash) 16 MB

System memory: 32 MB SD-RAM

The print controller is equipped with 32 MB memory as standard and can be expanded to 160

MB maximum.

● I/O Interface

Centronics (IEEE1284)/ amphenol 36 pin male connector

Card Edge Type/20 MHz/32 bit

100Base-TX and 10Base-T

The optional network interface card is used to connect to the Ethernet. The network interface

card is the internal print server card which supports multiple protocols on the Ethernet. This

card includes a CPU and a flash memory with an upgradable program.

The network interface card supports the following network protocol.

• IPX/SPX (NetWare, Peer to Peer)

• TCP/IP (LPD/LPR, Peer to Peer  )

Refer to the corresponding INSTRUCTION MANUAL for connection to the network interface

card.