Furuno gp37 用户手册

3. WAYPOINTS (MARKS) 

5.  The cursor is selecting “NEW?”; press the 

[ENT] key.   

 

6.  Enter name (if desired) with the cursor 

pad and then press the [ENT] key. 

°

°

* Current position

 

7.  The cursor is selecting latitude. Press the 

[ENT] key. Enter latitude with the cursor 
pad and then press the [ENT] key.   

8.  Press the [ENT] key, enter longitude in 

similar fashion as you did with latitude and 
then press the [ENT] key. 

 To enter position by TDs, see 

paragraph 7.7. 

9.  To change mark shape, choose the mark 

currently shown and then press the [ENT] 
key. Use ▲ or ▼ to choose mark desired 
and then press the [ENT] key. 

10. To change date and time to the comment 

of your choice, press the [ENT] key, enter 
comment with the cursor pad, and then 
press the [ENT] key again. 

11. Place the cursor on “Exit?.” Press the 

[ENT] key. 

12. Press the [MENU] key twice to finish. 
 

The MOB mark denotes man overboard 
position. Only one MOB mark may be entered. 
Each time the MOB mark is entered the 
previous MOB mark and its position data are 
written over.   
 
1.  Press the [MARK/MOB] key on any 

display until the following display appears. 

 

2.  To set MOB position as destination, press 

◄ to choose YES and then press the 
[ENT] key. Then, the plotter display marks 
MOB position as shown in the illustration 
below. 

 Selecting “NO” saves the position 

as a waypoint. 

D2D

[ 40     

n

m

     1

°

0.06

n

m

°

°

BRG: 

RNG: 

MOB

MOB position set
as destination

Bearing and range to MOB position