Furuno gp37 用户手册

4. ROUTES 

8.  Press the [MENU] key twice to finish.   

The current position is saved under the 
next sequential waypoint number, the 
display shows “***SAVED!” (*** = 
waypoint number) and a beep sounds. 
Thereafter waypoints are saved at the 
interval of time or distance set. 

When 30 waypoints have been saved, a 
message informs you that you can no 
longer save waypoints to the route. Press 
the [ENT] key to erase the message. The 
route is automatically saved to “LOG” in 
the ROUTES menu, under the name of 
the first and last waypoint numbers used. 
Then, open the ROUTES menu and go to 
step 13.   
 
You can manually stop saving waypoints 
and save the route by going to step 9. 

9.  After the desired number of waypoints 

have been entered, press the [MENU] key 
once or twice to open the menu. 

10. Choose ROUTES and then press the 

[ENT] key. 

11. Choose VOYAGE ROUTE and then press 

the [ENT] key. 

12. Choose STOP and then press the [ENT] 

key.  

13. Choose LOG and then press the [ENT] 

key.  

14.“MOVE?” is selected; press the [ENT] key. 

The route is moved from    “LOG” and is 
registered under the next sequential route 
number. 

15. Press the [MENU] key twice to finish. 
 
 

1.  Press the [MENU] key once or twice to 

display the menu. 

2.  Choose ROUTES and then press the 

[ENT] key. 

3.  Choose the route to edit. 
4.  Press the [ENT] key. 

5.  Place the cursor on the waypoint to 

replace. 

6.  Press the [ENT] key to show the route edit 

options. 

 

7.  “CHANGE?” is selected; press the [ENT] 

key.  

°

°

 

8.  NAME is selected. Press the [ENT] key. 

Use the cursor pad to enter waypoint 
name. 

9.  Press the [ENT] key. 

 If the name entered at step 8 does 

not exist, the window shown below 
appears. Choose “CREATE?”, 
“RENAME?” or “Quit?” as appropriate and 
then press the [ENT] key. 

 

10. Choose  “Exit?.” 
11. Press the [ENT] key. 
12. Press the [MENU] key twice to finish.