Furuno gp37 用户手册

5. DESTINATION 

1.  Press the [GOTO] key. 
2. Choose “ROUTE?”. 
3.  Press the [ENT] key. 

®

®

®

 

4.  Choose a route. 
5.  Press the [ENT] key. The following 

options window appears. 

 

6.  Choose “FORWARD?” or “REVERSE?”, 

the order in which to traverse the route 
waypoints, and then press the [ENT] key. 

Intermediate Point 2
(WPT 002)

KOBE
(Starting point)

Intermediate Point 1
(WPT 001)

Intermediate Point 1
(WPT 003)

OSAKA
(Arrival point)

 

Current position becomes the starting point. A 
dashed line runs between the starting point 
and all route waypoints. Next destination 
waypoint is shown in reverse video. 
 
The destination waypoint is automatically 
switched when the boat enters the arrival 
alarm range or the boat passes an imaginary 
perpendicular line passing through the center 
of the destination waypoint. For how to set 
the arrival alarm, see paragraph 6.1.   
 
 

You may place a desired waypoint in the 
GOTO options window and use it to set 
destination. 
 

1.  Press the [GOTO] key. 
2.  Choose “SETUP?” and then press the 

[ENT] key. 

3.  Choose waypoint desired and then press 

the [ENT] key. The GOTO window 
appears, showing the waypoint selected 
as below. 

Location of
user waypoint
(Example: 001)

4.  Choose user waypoint and then press the 

[ENT] key. 

 
A dashed line connects own ship and the 
waypoint selected, which is shown in reverse 
video. 
 
 

You can cancel destination as follows: 
 
1.  Press the [GOTO] key. 
2. Choose “OFF?”. 
3.  Press the [ENT] key.