Furuno gp37 用户手册

 

The display unit can be installed on a desktop, 
on the overhead, or in a panel (optional flush 
mounting kit required). Refer to the outline 
drawings at the end of this manual for 
installation instructions. When choosing a 
mounting location, keep in mind the following 
points: 

• 

Locate the unit away from exhaust pipes 
and vents. 

• 

The mounting location should be well 
ventilated. 

• 

Mount the unit where shock and vibration 
are minimal. 

• 

Locate the unit away from equipment which 
generates electromagnetic fields such as a 
motor or generator. 

• 

Allow sufficient maintenance space at the 
sides and rear of the unit and leave 
sufficient slack in cables, to facilitate 
maintenance and servicing. 

• 

Observe compass safe noted on page iii to 
prevent interference to a magnetic 
compass. 

Desktop

Overhead

There are two types of flush mounting kits. 
For details, see the outline drawings at the 
end of this manual. 
 
Flush mount F kit 

Cosmetic 
panel 

20-016- 
1051 

100-251-370

1 

Tapping 
screw 

5X20 
SUS304 

000-802-840

4 

Hexagon- 
head bolt 

M6X12 
SUS304 

000-862-127

2 

Spring 
washer 

M6 
SUS304 

000-864-260

2 

1.  Using the template (supplied), cut out a 

hole 92(H)X183(W) in the mounting 
location. 

2.  Fasten the cosmetic panel to the display 

unit with hexagon-head bolts and spring 
washers. 

3.  Set the display unit to the mounting 

location and fix it with tapping screws.