GMC jimmy 2002 用户手册

1. Remove the headlamp assembly as shown under

“One

-

Piece Composite Headlamp System” earlier in

this section.

2. Twist the bulb socket to

remove it from the
headlamp assembly.

3. Pull the bulb straight out to remove it from 

the socket.

4. Push the new bulb into the socket until it snaps 

into place.

5. Put the bulb socket into the lamp assembly and turn

it clockwise until it is tight.

6. Put the headlamp assembly back into the vehicle.

7. Install the two retaining clips.

8. Close the hood.

1. Remove the headlamp assembly as shown under

“Two

-

Piece Composite Headlamp System” earlier in

this section.

2. Locate the locking tabs

on the assembly.
Squeeze the tabs
together and push that
end of the assembly out
while holding the tabs.
The assembly will 
swing out.

3. Unplug the electrical connector.