Clifford g5 11cx 562c 用户手册
15
©
2004 Directed Electronics, Inc.
QUICK REFERENCE GUIDE:
To lock using your remote
■ To arm the system press
for one second. The doors will lock (if con-
nected). The LED will begin to flash. The Failsafe
®
Starter Kill will pre-
vent the vehicle’s starter from cranking if it has been installed. The ve-
hicle’s horn (if connected) will honk and the parking lights will flash
once to confirm arming of the system.
hicle’s horn (if connected) will honk and the parking lights will flash
once to confirm arming of the system.
To unlock using your remote
■ To disarm the system press
for one second. The doors will unlock (if
connected). The Failsafe
®
Starter Kill will
be deactivated and the vehicle’s horn (if connected) will honk twice and
the parking lights will flash twice.
the parking lights will flash twice.
Disabling the Failsafe
®
Starter Kill without a transmitter
■ Turn on the ignition. Press and release the Valet
®
switch within 10 sec-
onds. The LED will stop flashing and the vehicle should start. Be sure to
check with the installer for the location of the Valet
check with the installer for the location of the Valet
®
switch.
To enter or exit Valet
®
Mode
■ Turn the ignition to the "ON" position. Turn the ignition back off. Press
and release the Valet
®
switch within 10 seconds. The status LED will
light steadily if you have entered Valet
®
Mode. To exit Valet
®
Mode,
repeat the steps above. The LED will turn off when exiting Valet
®
Mode.
To activate Panic Mode
■ Press and hold
for 1.5 seconds.
Location of Shutdown Switch______________________________
Cut along dotted line and f
old f
or a quick and eas
y
r
efer
ence to k
eep in y
our pur
se or w
allet.
✂
✂