Chevrolet 2010 aveo sedan 用户手册
Raise or lower the lever until the arrow starts to flash to
signal a lane change. Hold it there until the lane change
is completed.
signal a lane change. Hold it there until the lane change
is completed.
The lever returns to its starting position whenever it is
released.
released.
If after signaling a turn or a lane change the arrow
flashes rapidly or does not come on, a signal bulb may
be burned out.
flashes rapidly or does not come on, a signal bulb may
be burned out.
Have the bulbs replaced. If the bulb is not burned out,
check the fuse. See Fuses and Circuit Breakers on
page 6‑87.
check the fuse. See Fuses and Circuit Breakers on
page 6‑87.
Headlamp High/Low-Beam Changer
The headlamps must be on for this feature to work.
Push the turn signal lever away from you to turn the
high beams on.
high beams on.
This instrument panel cluster light
3
comes on while
the high beams are on and the ignition is turned to
ON/RUN.
ON/RUN.
Pull the lever towards you to return to low beams.
Flash-to-Pass
This feature is used to signal to the vehicle ahead that
you want to pass.
you want to pass.
Pull the turn signal/multifunction lever towards you until
the high-beam headlamps come on, then release the
lever to turn them off.
the high-beam headlamps come on, then release the
lever to turn them off.
4-5