Navman 5605 用户手册

TRACKER 5505/5505i/5605 Installation and Operation Manual

23

NAVMAN 

To go to the waypoints display, press 
 

, select Other, then select 

Waypoints.

The waypoints display is a list of the waypoints 
that have been entered, each with waypoint 
symbol, name, latitude and longitude, distance 
and bearing from the boat, type and display 
option. 
If there are more waypoints than will fit on the 
display, press 

 or 

 to scroll up or down a 

page at a time.

Creating a new waypoint from any display
Press 

. A new waypoint is created at the 

boat position with the default name and data. 
To change the default data, see section 5-2-3.
Creating and editing a new waypoint from 
the chart display
1  To create a waypoint at the boat position, 

press ESC to switch the chart to centre on 
boat mode (or press 

, see above).

 

Or, to create a waypoint at a different point, 
move the cursor to that point on the chart.

2  Press 

.

3  A new waypoint, with the default name and 

data is created.

4  Change the waypoint data if necessary (see 

section 5-2-7). Select 

Save.

Creating a new waypoint from the  
waypoints display
1  In the waypoints display, press 

 and 

select 

Create.

2  A new waypoint, with a default name and 

data, is created at the boat position. 

3  Change the waypoint data if necessary (see 

section 5-2-7). Select 

Save.

Note: Waypoints can also be created when a 
route is created (see section 6-2-1). 

Moving a waypoint from the chart display
1  In the chart display, move the cursor to the 

waypoint to move.

2  Press 

 and select

 Move.

3  Move the cursor to the new position and  

press 

.

Moving a waypoint from the waypoints 
display
To move a waypoint from the waypoints 
display, edit the waypoint (see section 5-2-3) 
and change the latitude and longitude.

Do not create a navigation waypoint on 
land or in dangerous water.

www.Busse-Yachtshop.de      email: info@busse-yachtshop.de