Navman 5605 用户手册

TRACKER 5505/5505i/5605 Installation and Operation Manual

NAVMAN

14-8 Setup > Units

Press

one or more times until the

Setup menu is displayed, then select Units:

The default units are shown above.

Distance

nm (nautical miles), mi (miles) or km
(kilometres)

Speed

kn (knots), mph (miles per hour) or kph
(kilometres per hour)

Depth

ft (feet), m (metres) or fa (fathoms)

Fuel

Litres, USGal (US gallons) or ImpGal (Imperial
Gallons)

Compass

°T (True north) or °M (Magnetic north)

Temperature

°F (Fahrenheit) or °C (Celsius)

Wind (optional)

Requires a wind instrument: True or App
(Apparent)
Note: that the units for wind speed are the
speed units.

Pressure

Requires SmartCraft: kPa or psi

Baro (Barometric pressure)

Requires a Navman VHF receiver connected by
NavBus: InHg or mB.

Use this feature when the TRACKER is
connected to other NAVMAN instruments
through NavBus or any compatible NMEA
instrument.
Press

once or more until the

Setup

menu is displayed, then select

Comms:

NMEA out

NMEA is generally used with third party
instruments (see section 15-10). Select this to
transmit NMEA sentences, for example to an
autopilot.

NMEA data

Use this to specify which NMEA sentences will be
transmitted (see section 15-10 and Appendix A).

Lat/lon dps

Select the number of decimal points used
for latitude and longitude transmitted in
NMEA sentences.

NavBus

NavBus is the preferred method for connecting
the TRACKER to other NAVMAN instruments.
Select this if the instruments are connected
using NavBus.

NavBus Group

Use this when a group of NAVMAN instruments
are connected together using NavBus, to
specify a group of instruments for backlighting,
if required. Then, if the backlight setting on one
instrument in the group is adjusted, the other
instruments change automatically. Otherwise,
select 0. See section 15-9.

14-9 Setup > Comms