Lexmark TN3270E 用户手册
102
Operations - TN3270E SETUP: NETWORK SETUP > SERVER INFO > Keep Alive Type
Keep Alive Type
This Network Setup > Server Info option specifies the type of keep
alive signal sent to the host or SNA gateway server. This signal is
sent to the host by the SCS/TNe Emulation to keep the Telnet ses-
sion active. The
alive signal sent to the host or SNA gateway server. This signal is
sent to the host by the SCS/TNe Emulation to keep the Telnet ses-
sion active. The
setting determines how often this
signal is sent.
I
MPORTANT
:
If the Mainframe has difficulty detecting the
selected signal type, try changing to another type.
Check with your system administrator to
determine the type of signal to select.
selected signal type, try changing to another type.
Check with your system administrator to
determine the type of signal to select.
Check with your system administrator to determine the type of sig-
nal to select.
nal to select.
Option Value
Comments
None
Do not send keep alive signals. When this setting is
selected, the host should be configured to send a
keep alive signal. The SCS/TNe Emulation can
receive and respond to a Telnet NOP or a Timing
Mark keep alive signal.
selected, the host should be configured to send a
keep alive signal. The SCS/TNe Emulation can
receive and respond to a Telnet NOP or a Timing
Mark keep alive signal.
Telnet NOP *
Send a Telnet No Operation as the keep alive
signal.
signal.
Timing Mark
Send a Telnet timing mark as the keep alive signal.