IBM as-400 用户手册
AS/400
Prompt
AS/400 Parameter
5494
AS/400
Value
5494 Value
Notes
Field
Subfield
Link type
LINKTYPE
AA
-
*LAN
4
5494 configuration values must
match the values specified for
the LINKTYPE parameter on the
CRTCTLAPPC command. For
advanced program-to-program
communications (APPC)
controllers that specify
LINKTYPE(*SDLC), the value
specified in the 5494
configuration must be
compatible with the physical
interface (INTERFACE
parameter) specified on the
CRTLINSDLC command.
match the values specified for
the LINKTYPE parameter on the
CRTCTLAPPC command. For
advanced program-to-program
communications (APPC)
controllers that specify
LINKTYPE(*SDLC), the value
specified in the 5494
configuration must be
compatible with the physical
interface (INTERFACE
parameter) specified on the
CRTLINSDLC command.
Select 4 for the network
connections.
connections.
Example: Connecting AS/400 to a 5494 controller connected by token-ring
Configuration parameters must be coordinated when you connect an AS/400 system to a 5494 controller
that is connected by token-ring.
that is connected by token-ring.
The following diagram shows the AS/400 parameters and 5494 parameters that need to match when you
use token-ring.
use token-ring.
Chapter 7. Communicating with remote workstation controllers
43