brocade-communications-sy rfs6000 用户手册
602
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Wireless configuration commands
20
ap-containment
Sets the rogue AP containment parameters
Supported in the following platforms:
•
Mobility RFS4000 Controller
•
Mobility RFS6000 Controller
•
Mobility RFS7000 Controller
Syntax
ap-containment [add <MAC>|enable|interval <interval>)
Parameters
Example
RFController(config-wireless)#ap-containment enable
RFController(config-wireless)#ap-containment interval 300
RFController(config-wireless)#ap-containment add 00-15-70-37-fa-be
RFController(config-wireless)#
NOTE
The effective ap -containment interval for APs is 200ms which is channel dwell time. This remains
same even if it configured to a lower value. For single-scan-APs, the smaller values of containment
will be effective.
The effective ap -containment interval for APs is 200ms which is channel dwell time. This remains
same even if it configured to a lower value. For single-scan-APs, the smaller values of containment
will be effective.
add <MAC>
Adds an AP’s MAC Address <MAC> into the rogue AP containment
list.
list.
enable
Enables the Rogue AP Containment feature.
interval <interval>
Sets the time <interval>, a value in the rage of 20-5000, between
two Rogue AP containment processes. Time duration is in
milliseconds.
two Rogue AP containment processes. Time duration is in
milliseconds.