brocade-communications-sy rfs6000 用户手册

Wireless configuration commands

20

client

Use this command to configure a wireless client

This command creates an exclude-list or include list. Creating a list moves the user to a new mode 

config-wireless-client-list

. 

Refer section 

 for 

(config-wireless-client-list)

 command summary.

Supported in the following platforms:

•

Mobility RFS4000 Controller

•

Mobility RFS6000 Controller

•

Mobility RFS7000 Controller

Syntax

client [exclude-list|include-list] <list-name>

Parameters

Example

RFController(config-wireless)#client exclude-list JustMe

RFController(config-wireless-client-list)#

Configuring a client

Refer to the configurations below to:

•

Create an exclude list.
RFController(config-wireless)#client exclude-list protected-hosts
RFController(config-wireless-client-list)#

•

Add a host entry into the exclude list.
RFController(config-wireless-client-list)# station printers 
00:00:AA:DD:EE:11/00:00:FF:DD:EE:11

RFController(config-wireless-client-list)# station testing-host1 00:11:AA:03:1B:FE

•

Associate the exclude list to a WLAN.

RFController(config-wireless-client-list)# wlan 1

•

Configure RADIUS server parameters

.

exclude-list <list-name>

Sets the wireless client exclude list configuration. A Client NAC 
check is conducted, except for those in the exclude list. Devices in 
the exclude list will not have a NAC check performed.

include-list <list-name>

Defines the wireless client include list configuration. No Client 
NAC check is conducted, except for those in the include list. 
Devices in the include-list will have NAC checks.

<list-name>

Name of the list to be created.