brocade-communications-sy rfs6000 用户手册
638
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Wireless configuration commands
20
multicast-throttle-watermark
Configures watermarks for supporting bursts of broadcast/multicast frames
Supported in the following platforms:
•
Mobility RFS4000 Controller
•
Mobility RFS6000 Controller
•
Mobility RFS7000 Controller
Syntax
multicast-throttle-watermarks low <0-100> high <0-100>
Parameters
Example
RFController(config-wireless)#multicast-throttle-watermarks low 10 high 20
RFController(config-wireless)#
low <0-100>
Sets the low water-mark. If the percentage of free packets in the
system is lower than this threshold, the incoming frame is
dropped.
system is lower than this threshold, the incoming frame is
dropped.
high <0-100>
Sets the high water-mark. If the percentage of free packets in the
system is between the low water-mark and this value, the packet
is subjected to a random-early-drop. If free packets are greater
than this value, the packet is processed.
system is between the low water-mark and this value, the packet
is subjected to a random-early-drop. If free packets are greater
than this value, the packet is processed.